Huawei MA5683T MA5600T Specifications and Datasheet
We can supply Huawei MA5600T,MA5680T,MA5603T,MA5683T,MA5608T Boards.
Charles@sandestech.com, http://www.sandestech.com
Charles@sandestech.com, http://www.sandestech.com
| System performance | |
| Backplane bus switching capacity | 1.5 Tbit/s |
| System L2 packet forwarding rate | SCUB: 72 Mpps |
| SCUN: 726 Mpps(Active/Standby mode), 1452 Mpps(Load-sharing mode) | |
| SCUF: 190 Mpps | |
| SCUH: 1428 Mpps(Active/Standby mode), 2856 Mpps(Load-sharing mode) | |
| Control board switching capacity | SCUB: 48 Gbit/s |
| SCUN: 480 Gbit/s(Active/Standby mode), 960Gbit/s(Load-sharing mode) | |
| SCUF: 128 Gbit/s | |
| SCUH: 960 Gbit/s(Active/Standby mode), 1920Gbit/s(Load-sharing mode) | |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| BER in full load | BER of port when transmitting data in full load < 10 e-7 |
| System performance | |
| System | Redundant configuration |
| System availability in typical configuration | >99.999% |
| Mean Time Between Failures (year) | ≈45 |
| Configuration | |
| Maintenance port | Number of 10 Mbit/s/100 Mbit/s maintenance Ethernet ports: 1 |
| Number of serial ports for local/remote maintenance: 1 | |
| Monitoring port | Number of environment monitoring serial ports: 1 |
| Maximum number of GPON ports in a subrack | 96 |
| Maximum number of 10G GPON ports in a subrack | 24 |
| Maximum number of P2P FE ports in a subrack | 288 |
| Maximum number of P2P GE ports in a subrack | 288 |
| Maximum number of upstream ports (GE ports in the GIU slot) in a subrack | 8 |
| Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack | 4 |
| Management ports | |
| Outband management Ethernet port (RJ-45) | SCUB/SCUN/SCUF/SCUH control board: 1 Port Per Board |
| Local serial port (Console) | SCUB/SCUN/SCUF/SCUH control board: 1 Port Per Board |
| Upstream ports | |
| GE electrical port | GICE: 4 Ports Per Board |
| GICG: 2 Ports Per Board | |
| GE optical port | GICF/GICK: 2 Ports Per Board |
| SCUB/SCUN/SCUH/GICD/GSCA: 4 Ports Per Board | |
| ETHB/SPUA/SPUF: 8 Ports Per Board | |
| SPUC: 40 Ports Per Board | |
| 10GE optical port | X2CS/SPUA: 2 Ports Per Board |
| SPUC: 4 Ports Per Board | |
| SPUF: 8 Ports Per Board | |
| E1 port | TOPA: 16 Ports Per Board |
| STM-1 upstream optical port | TOPA: 2 Ports Per Board |
| PON upstream optical port | P2CA: 2 Ports Per Board (One PON port is available and the other is backup.) |
| Service ports | |
| GPON port | GPBD/GPBH: 8 Ports Per Board |
| GPFD: 16 Ports Per Board | |
| 10G GPON port | XGBC: 4 Ports Per Board |
| XGBD: 8 Ports Per Board | |
| P2P GE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Per Board, Two-fiber bi-directional: 24 Ports Per Board |
| P2P FE optical port | OPFA: 16 Ports Per Board |
| OPGD/OPGE: Single-fiber bi-directional: 48 Ports Per Board, Two-fiber bi-directional: 24 Ports Per Board | |
| Ethernet optical port | ETHB: 8 Ports Per Board |
| E1 port | H802EDTB: 16 Ports Per Board |
| Device Specifications | |
| Dimensions (W x D x H, excluding mounting brackets) | 442.00 mm x 283.20 mm x 263.90 mm |
| Dimensions (W x D x H, including mounting brackets) | 535.00 mm x 283.20 mm x 263.90 mm, for ETSI cabinet |
| 482.60 mm x 283.20 mm x 263.90 mm, for IEC cabinet | |
| Weight (empty chassis) | 7.0kg |
| Working environment temperature | For an indoor cabinet Configured with 1 subrack: -25°C to +65°C Configured with 2 subracks: -25°C to +55°C |
| Working environment humidity | 5% RH to 95% RH |
| Atmosphere pressure | 61 kPa to 106 kPa |
| Altitude | < 4000 m |
No comments:
Post a Comment